Using the CalmCarry® device is easy and straightforward.

Follow these simple steps to use the device effectively:

1.) Charge Up - Ensure your CalmCarry device is fully energized and ready for use. A maximum charge time of half an hour suffices. Remember, it's crucial not to leave the device on charge for over two hours to avoid potential overcharging and subsequent damage.

2.) Power On - Post charging, press the power button on the side of device and **hold for 5 seconds **to activate your device.

By default, the device starts in the low-frequency mode, specifically calibrated for tendinitis relief. This mode is explicitly designed for reducing discomfort, relieving pressure, and addressing pain associated with repetitive hand movements.

3.) Position Your CalmCarry - Our devices yield the best results when accurately placed on the PC8 acupressure point in your palm (refer to the image below).

Holding the device in your affected hand activates the therapeutic microcurrents, ideal for tendinitis, carpal tunnel syndrome, and arthritis relief.

For carpal tunnel syndrome, ensure the device makes contact with the center of your palm where nerve discomfort occurs.

For arthritis relief, you can use a higher frequency mode by pressing the power button again. Correct placement is vital for effective results - incorrect positioning may result in a lack of sensation or benefits.

If the pulse isn't immediately felt, press the '+' button three to four times and reposition the device on the correct point. Once done, you can adjust the intensity to your preferred comfort level.

4.) Time for Relief - All CalmCarry devices are equipped with a 20-minute automatic shut-off feature, ensuring an optimal session without overuse of the affected area.

Click Here ➡️ How to use your CalmCarry device Testing Your Device -

1.) Please charge the device for 1 hour.

2.) After charging, turn the device on; you should see a light come on.

3.) Increase the power by pressing the '+' button a few times.

4.) Place your finger across the round button in the center while simultaneously touching the other part of the metal body.

If you can feel the pulses after this test, your device is working correctly, and you can begin to use it to help with your hand and wrist conditions.